011-41802278, 011-41802279
011-41406678, 011-41811677
E-mail: philcon@satyam.net.in,
Visit us at: philconindia.comread more
|
TECHNICAL
STRENGTH
Material Lexan grade 943 Polycarbonate engineering plastic from GE. USA. It is Tough, resistant to aging , non-ignitiable, insulating,ultra violet resistant. a) Spring-Stainless steel spring b) Current carrying parts are Brass, Copper, Bronze and Silver alloy. Resistance to HUMIDITY Philcon products are subjected to Humidity Treatment with a relative humidity between 91% to 95%. The temperature of the air in which the samples are tested is maintained between 15° C to 55C°. Specified dimensions of hole diameter for conductors Specified dimentions 6A-4mm/16A-4.5mm (This hole along with the screw in the switch has the function of tightening the wire when inserted in the hole). a) Universal mounting holes and hence can be installed on many metal boxes available in the market. b) Oval mounting holes for good alignment even on bed shaped metal boxes. c) Two Plates Strong construction so no visibilility of mounting screws. d) Top frame can temporarily be removed when painting walls etc…to avoid dirtiness and re-fix afterwards. e) High impact strength, plates do not break even when twisted. f) U.V. stabilized and hence does not fade with the time. Making and Breaking capacity Switches are capable of making and breaking an electrical circuit at 1.1 times rated voltage and 1.25 times rated current. Mechanical on/off setting of 200 operations at a uniforms rate of 30 operations per minute, for 6A & 15 operations per minute for 16A. The switches having rated current of 6A/16A passes through normal operations of 20000 switching cycles i.e. 40000 operations, inductive load of 6A/16A with low power factor cos 0.3 ± 0.5. All Philcon products passes the glow wire test at a temp of 960C° in which the glow wire is to be contacted with the specimen which is to be tested for a period of 30 ± 1 sec. The heating temp is maintained during this period. Pull at vertical and circular motion with a speed of 1 Turn per 5 Seconds. Required Pull & Area of the conductor
Contacts Solid Silver Cadmium Oxide 0.5 mm Layer for the high and long life. Riveting Pnumetically riveted contacts for high sheering strength and stable current flow for low heat and long electrical life. Activator 66 Nylon 33% glass field for long & proper motion life of On/Off is being used. Contacts tubes for better conductivity besides retaining its shapes are made out SPRING HARD Phosphorus Bronze, retains it springiness even after 10000 operations hence not heats up. An unique design spring with holder to further improve the contact pressure and hence the life of socket. Safety shutters Uniquely designed vertical mechanism. Dalrin material which fully covers the live contacts & protects the children form the accidental shocks. Toxication It is negligible equivalent to Zero. LEXAN grade 943 material’s melting point is 230° C– 260° C. After melting it will take a shape of a lump/powder. With the help of 150kg hammering pendulum pressure from a distance of 01 mtr to the product will prove its strength. All switches are tested at 2000 volt R.M.S. for high voltages tests. Rusting & Oxidation All terminals are plated with silver for the protection. Warranty The entire range of Philcon modular plate switches and accessories (except electronic modules) are provided with a warranty of 15 years against the entire manufacturing defects. Free of cost, replacement will be given against the defective or failed modules during normal operation. This does not cover the failure or damages due to mishandling or usage beyond recommended specification. Electronic modules are provided with 2 years of warranty. |
